HME DX200 Intercom System

dx200-2sqr.jpg
CCM-BP200.jpg
CCO-CZ11433-90_2__76921.jpg
s-l400.jpg
h8530-sqr.png
dx200-2sqr.jpg
CCM-BP200.jpg
CCO-CZ11433-90_2__76921.jpg
s-l400.jpg
h8530-sqr.png

HME DX200 Intercom System

$0.00

The ClearCom HME DX200 System is a Single Channel comms system, which comes complete with synthesized voice prompts, rechargeable batteries, battery charger, and rugged, lightweight beltpacks for reliable and cost-effective operation. 

The beltpacks are available with Single-Sided or Dual Sided HME Headsets. We also offer David Clark Headsets, with their superb noise cancelling for louder working environments i.e. Rock Concerts, etc.

With digital encryption and frequency hopping technologies, you'll never have to worry about unauthorized users hearing your communications. 

For crystal-clear, secure and interference-free communications, the digital DX200 System is designed to give you superior performance at affordable prices.

Enquire
  • Frequency Range: All, 2400 to 2483.5 MHz Low, 2401.92 to 2439.94 MHz High, 2443.39 to 2481.41 MHz
  • Frequency Response: 200 Hz to 3.5 kHz
  • Power Requirements: 100-240VAC, 50-60Hz or 12-14VDC
  • Temperature Range: 32-122°F (0-50°C) Size: 19” x 1.72” x 17.13” (1-RU) (48.26 x 4.37 x 43.51 cm)
  • Weight: 9.2 lbs. (4.18 kg)
  • Maximum # of Beltpacs per Base: 15 can be registered Any 4 can have simultaneous full-duplex communication at one time
  • 4-Wire I/O: RJ45, 600Ω balanced, level adjustable, simultaneous operation with 2-wire
  • 2-Wire I/O: XLR-3M, XLR-3F, externally-switchable RTS® or Clear-Com® mode, 200Ω, level adjustable, null adjustable
  • Auxiliary Input: XLR-3F/¼” (6.35 mm) combo jack, 600Ω balanced, level adjustable
  • Auxiliary Output: XLR-3M, 600Ω balanced, level adjustable 8Ω
  • Speaker Output: 1W into 8Ω
  • Headset Connector: 4-pin mini-DIN Electret microphone
  • Headset Output: 250mW into 32Ω
  • Front Panel Controls: Power switch Clear/Band, Reset, Unlatch and Register buttons, IC and ISO Receive level adjustments, IC 2W/4W and 4W-Only buttons, IC4W-Only Send and Receive level adjustments, Auxiliary In and ISO+ buttons, Auxiliary In and Out level adjustments, Rotary knob for volume adjustment, Headset IC/ISO Select button and Headset Talk button
  • Front Panel Indicators: Status indicator, IC and ISO Receive LEDs, IC 2W and 4W-Only LEDs, Auxiliary In/Out LEDs, Headset IC/ISO select LEDs, Headset PTT LED
  • Rear Panel Controls: Clear-Com®/RTS® mode switch, RTS® Channel 1/2 switch, 2-wire channel line null adjustment
  • Antenna Type: External ½ -wave dipole (R-TNC connector) RX/TX horizontal/vertical diversity
  • System Distortion: <2%
  • Communication Security: 64-bit encryption dual-slot diversity

Transmitter

  • Type: Frequency hopping, spread spectrum
  • Transmit Power: 100mW burst
  • Modulation Type: Gaussian filtered FSK, TDM
  • Frequency Stability: 13 ppm
  • Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature

Receiver

  • Type: Frequency hopping, spread spectrum
  • RF Sensitivity: <−90dBm w 10-3 BER
  • Frequency Stability: 13 ppm Distortion: <2%